Getting Started

Before assembling your SkyView™ 2, please ensure you have downloaded the SkyView App on your mobile device or tablet. You may also check out our video tutorial on how to set up your SkyView 2.

1. SkyView 2 requires minimal assembly, remove the light from the box, the power supply, and power cord.
2. Next, plug in the power supply and power cord together.
3. Then plug the power supply into the base of your SkyView 2.
4. Finally, plug the power cord into the wall.

Your SkyView™ is designed to provide benefits in the rooms where you spend the most of your time. Ideally, yes, you would have a SkyView circadian lamp for each room that is frequently occupied, especially the rooms you are sleeping or working in. To receive the best effect and benefits, SkyView should be positioned at a standard distance from your face as most table lamps. It is recommended that 1-3 feet or 0.3-0.9 meters from your face on a workstation, bedside table, or living room area. This placement will provide the correct amount of light to meet standard recommendations for daytime, evening, and nighttime to best support your physiology, sleep, and wakefulness.

There are plenty of locations to place your SkyView wellness lamp. Placing SkyView on your bedside table or nightstand in your bedroom provide additional benefits - the automatic sunrise feature wakes you up during the lightest part of your sleep, boosting your morning awakening response and gently welcoming you into the new day.

You can adjust the light to a “comfortable” brightness level using the dial on base. Twist the dial counterclockwise to dim the lamp, and clockwise to increase the brightness. Check out our support video for a tutorial on brightening and dimming your SkyView circadian wellness lamp.

To connect your SkyView Circadian Wellness Lamp to Wi-Fi, please follow the steps below:

1. Ensure your device running the SkyView App is connected to your Wi-Fi.
2. On your device, if needed, turn your Wi-Fi service “off” and back “on” to refresh the device Wi-Fi connection.
3. Next, ensure that the device running your SkyView App is Bluetooth enabled.
4. Also be sure that the SkyView App is Bluetooth enabled in the device settings menu.
5. Keep in mind, the device running your SkyView App must stay near your SkyView lamp during the entire setup.
6. Refresh the app by closing and reopening your SkyView App.
7. If needed, reboot your Wi-Fi router to refresh all Wi-Fi connections.

Your SkyView™ Circadian Wellness lamp arrives with the light source you need to take your first step toward a better you!

The “light bulb” inside SkyView is called the light engine and is included with the purchase of your SkyView lamp.

The SkyView light engine features an innovative combination of light-emitting diodes (LEDs), specially engineered to support healthy circadian rhythms from morning until night.

Even more impressive, this combination of LEDs was designed by our SkyView circadian lighting experts who designed the lighting for NASA's space station. You will not find a more effective, radiant, and complete wellness light than SkyView. There is not a “wellness,” “therapy” light, “tunable white,” or “smart” light on the market as effective for wellness, comfortable, and beautiful as SkyView™.

Your SkyView™ circadian lamp can be operated manually, without being connected to a schedule. Using the dial on the lamp base you can manually turn the light on/off, dim the light up or down, toggle between day and evening modes, and engage pairing mode.

1. To manually turn the light on / off, simply push down on the dial and release it to toggle between on and off.
2. To manually dim the light, turn the clockwise to increase brightness and turn it counterclockwise to reduce the brightness.
3. To switch from daytime to evening mode, simply push down on the dial and hold for four (4) seconds.
4. To engage pairing mode, simply push down and hold the dial for 10 seconds. When SkyView is in pairing mode, you will see a flashing red light until the app on your mobile phone or device is detected.