How do I reset my SkyView™ lamp so that it can connect to Wi-Fi?

You can reset your SkyView™ lamp-app connection by ‘forgetting’ the SkyView™ device on the app and initiating setup from the beginning. To do this:

1. From the SkyView app homescreen, select the device you want to unpair.
2. Tap the the edit icon in the top right corner.
3. Tap the edit icon next to "Device Details"
4. Tap "Remove Device" at the bottom of the screen

Now you are ready to pair your lamp to your app.

5. Make sure your SkyView lamp is plugged in.  

6. Press and hold down the dial for 10 seconds or until the lamp changes to a red pulsing light - this indicates the lamp is in pairing mode. 

7.  From your SkyView App homescreen, tap the plus sign in the top right corner of the screen.

8. Select "Add Device" 

9. Place the phone next to the lamp so the app can detect the light. 

10. Select the Wi-Fi network

10. Once the app finds the lamp, select the lamp for pairing. The light should change to daytime and the app will indicate successful pairing.