How to assemble my SkyView 2 Pro Circadian Wellness Lamp.

Before assembling your SkyView™ 2 Pro, please ensure you have downloaded and installed the SKYVIEW App on your mobile device or tablet. Follow the steps below to assemble your SkyView 2 Pro, you may also watch a video tutorial of this process.

1. Open your SkyView 2 Pro box.
2. Remove the base and the light engine.
3. Connect the light engine to the base of the lamp.
4. Plug in power at the bottom of the base.
5. Carefully remove the glass globe from the box.
6. Rotate the glass globe clockwise to it to the base.
7. Insert the AC plug of power supply unit into a wall outlet with a voltage between 100V and 240V. (Standard US (United States) residential voltage is 120V.)
8. Your SkyView 2 Pro will turn on with a flashing red light, signaling that it is in pairing mode.
   1. • If your SKYVIEW 2 Pro does not have the flashing red light, press, and hold the dial button for approximately 10 seconds to initiate the pairing mode.
9. Follow the instructions on the SkyView App, you may also view our support video on Pairing Your SKYVIEW Lamp to the SkyView App for a walkthrough.